The big excavators used for open-cast mining have lots of different drives. They use both medium voltage engines and low voltage drives. The large drives, in particular, are normally supplied by unearthed systems. These are monitored by an ISOMETER® with a coupling device. For smaller drives, we recommend monitoring with RCMS residual current monitoring systems or ISOMETER® insulation monitoring with EDS, as in both cases the faults occurring are immediately detected and reported to significantly improve availability.
Electric motors are generally employed for conveyor belts used in mining, which are driven by soft starters or frequency converters. However, these generate critical harmonic vibrations and DC currents which would normally not be present in the feeding AC system. With regular RCD or simple insulation monitors (e.g. 3 lamp method or 2 voltmeter process), this cannot be monitored with the requisite precision. There is a need for modern monitoring equipment which can recognise and report these problems quickly. Some standards even require a quick shutdown, which can be achieved via insulation monitoring devices.
Heavy lorries are increasingly being powered by electric drives. Bender insulation monitoring devices monitor the complete electrical drive system for utility vehicles, irrespective of whether they have electric or hybrid drives (often single-wheel drive). This means they provide effective protection against electric shocks and minimise the fire risk.
Primary crushers and crushers are needed in mining to break down the stone extracted from the ground. These use very large, powerful motors which are powered by soft starters or frequency converter due to their size. The resulting harmonic vibrations and DC currents are not recognised by normal RCDs. The use of a freely adjustable RCMA residual current monitoring system is therefore advisable. It guarantees fault detection.
The power supply is decisively important when it comes to operating mines. The medium voltage fed in is transformed down to 400 V in the transformer stations and fed to the mine via cable bars or busbars and the low-voltage distribution boards and sub-distribution boards. Bender ISOMETER®s or RCMS residual current monitoring systems monitor this and ensure continuous operation. Power quality is the perfect solution for monitoring the main and the sub-distribution boards.
|Datasheets||EDS309x||717.2 KB||EN||2019/05/13 10:31:3513.05.2019 10:31:35||D00012|
|Product Overviews||Residual Current Monitoring||2.2 MB||EN||2022/05/24 12:26:4924.05.2022 12:26:49|
|Technical article||Insulation Fault Location - Planning and Setup||112.4 KB||EN||2019/05/13 10:29:2213.05.2019 10:29:22|
|Technical article||Why the IT System is Often the Best Choice for Power Supply Systems of All Types||3.0 MB||EN||2019/07/11 12:53:3211.07.2019 12:53:32|
|Technical article||A Giant on its Way Towards the Future||111.8 KB||EN||2019/05/13 10:29:2213.05.2019 10:29:22|
|Technical article||Electrical Safety in a Modern Nickel Smelting Plant||358.8 KB||EN||2019/05/13 10:29:2213.05.2019 10:29:22|
|Technical article||Innovative Shearer Loader for Safe and Highly Efficient Coal Mining Operations||222.7 KB||EN||2019/05/13 10:29:2213.05.2019 10:29:22|
|Technical article||Electrical Safety in Control and Auxiliary Circuits||632.6 KB||EN||2023/04/21 09:09:3521.04.2023 09:09:35|
Errichten elektrischer Anlagen in Tagebauen, Steinbrüchen und ähnlichen Betrieben
Elektrische Ausrüstung von Elektro-Straßenfahrzeugen - Konduktive Ladesysteme für Elektrofahrzeuge - Anforderung eines Elektrofahrzeuges für konduktive Verbindung an AC/DC-Versorgung
Elektrische Ausrüstung von Elektrofahrzeugen Konduktive Ladesysteme für Elektrofahrzeuge – Teil 1: Allgemeine Anforderungen
Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems.
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
Electronic equipment for use in power installations