The pots in smelting systems in which the metal is melted are operated with various voltages and currents. The supply is often unearthed. In most systems, the pots must be monitored separately to avoid shutting down the whole plant in the event of a fault. The EDS fault location system is an excellent option here. It quickly and automatically locates defective power circuits.
The power supply is decisively important when it comes to smelting systems. The medium voltage fed in is transformed down to 400 V in the transformer stations and fed to the system via cable bars or busbars and the low-voltage distribution board and sub-distribution boards. Bender ISOMETER®s or RCMS residual current monitoring systems monitor this and ensure continuous operation. Power quality drives are the perfect solution for monitoring the main and the sub-distribution boards.
|Power Quality/Measuring and monitoring relays
|Product Overview ISOMETER®/ISOSCAN®
|Insulation Fault Location - Planning and Setup
|Electrical Safety in Control and Auxiliary Circuits
|Electrical Safety in a Modern Nickel Smelting Plant
Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems.
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
Elektrische Ausrüstung von Feuerungsanlagen und zugehörige Einrichtungen - Teil 1: Bestimmungen für die Anwendungsplanung und Errichtung