Ship_2000x350

Ships with electrical safety

On-board power supply

From diesel to thruster - staying safe on the way

Modern seagoing ships are supplied by at least 4 large diesel generators which are operated in an unearthed system. Monitoring for insulation faults using the common 3 lamp method is neither safe nor conforming to standards. The use of modern methods based on the AMP measurement principle also makes sense due to the massive frequency converters used. It must also always be guaranteed that the partially coupled generators are safely monitored. Bender ISOMETER®s achieve this. One of the key components of shipping engineering is the main machine with its auxiliary generators, kettle systems, auxiliary diesel and the generators for power generation and loading pumps. The main distribution boards on-board the tankers are generally designed as unearthed systems which are monitored with ISOMETER®s and fault locators.

 

Request advice

Onshore power supply

Always on the safe side, even on shore

For port operators and shipbuilders, setting up an onshore power supply represents a considerable undertaking. Transformer stations and cables to the quay need to be set up on land. These are mostly brought on-board via booms and connected to one or more points. Not only the tides, but also the International Ship and Port Facility Security Code must be taken into consideration. It is important that the monitoring equipment on board the ship and on shore are synchronised as otherwise there can be problems with fault detection. Bender products can be set up so that there are not two measuring systems in a single power circuit. Ask us!

 

Request advice

Cabins, accommodation, event areas

Earthed systems - as safe on board as on shore

Accommodation and cabins on ships can be exposed to problems with the electrical system within seconds which can only be found manually with a great deal of time and experience. This involves the risk of electric shock and machine downtime. With a multi-channel residual current system, an emerging problem can be detected, reported and repaired quickly.

 

Request advice

Galleys

Residual current monitoring in the galley

The galleys on ships are very prone to electrical faults which can only be detected manually with plenty of experience and a great deal of time. Especially the grills and steamers often cause problems. In all these applications, people can be injured or killed. With a multi-channel residual current system, an emerging problem can be detected much earlier than with a conventional RCD system and repaired before it becomes critical. Another advantage: The whole galley does not have to be shut down if one device is faulty.

 

Request advice

Radar, sonar, weapons systems, fire control

Fault detection even at high frequencies

On all ships, it is important that they remain fully controllable in all situations and, for example, the radar, sonar and weapons systems are operational at all times. Insulation monitoring devices from Bender can easily handle what are sometimes very high-frequency currents and guarantee continuous operation in every situation. Any electrical faults in parts of the whole system are quickly detected and reported and can then be repaired or replaced within a short space of time.

 

Request advice

Sanitary areas

Compact electrical safety in operating theatres and intensive care units

 

In terms of equipment, sanitary areas on board ships are similar to those in large doctors’ surgeries or small hospitals with their own operating theatres. Bender is also a capable partner in this area.

 

Request advice

Downloads

NameCategorySizeLanguageTimestampD-/B-Number
Power Quality/Measuring and monitoring relays Product Overviews 2.7 MB EN2022/05/2525.05.2022
Product Overview ISOMETER®/ISOSCAN® Product Overviews 5.3 MB EN2024/02/1616.02.2024
Product Overview - Residual Current Monitoring Product Overviews 6.3 MB EN2024/10/2929.10.2024
Power Quality Flyer 468.0 KB EN2022/12/1414.12.2022
Electrical safety costs little Market Segment Brochures 7.6 MB EN2024/05/0202.05.2024
Maritime Systems Market Segment Brochures 8.8 MB EN2024/02/0101.02.2024
EDS309x Application note 1.4 MB EN2019/05/1313.05.2019D00012
Insulation Fault Location - Planning and Setup Technical article 112.4 KB EN2019/05/1313.05.2019
Electrical Safety in Control and Auxiliary Circuits Technical article 632.6 KB EN2019/05/1313.05.2019
The “Oasis of the Seas”: A Cruise Ship of Superlatives Technical article 340.0 KB EN2019/05/1313.05.2019
A Safe Trip all the Time – with Reliable Power Supply Technical information 502.0 KB EN2019/05/1313.05.2019
Application Note onshore PE monitor Application note 279.5 KB EN2019/05/1313.05.2019D00252
"Cavour" Aids Relief Operation Technical article 389.0 KB EN2019/05/1313.05.2019
Knowledge, help and hope for people all over the world Technical article 20.0 B EN2023/04/1717.04.2023
Practical Expertise: Practical implementation of the central earthing point Technical article 20.0 B EN2023/04/2828.04.2023

Products

Insulation monitoring

ISOMETER® iso685…
ISOMETER® iso685…

Insulation monitoring device for inverter applications and large industrial plants

ISOMETER® IR425-D4
ISOMETER® IR425-D4

Insulation monitoring device for unearthed AC/DC control circuits

Insulation fault location

ISOSCAN® EDS440
ISOSCAN® EDS440

Insulation fault locator for localisation of insulation faults in main circuits

ISOSCAN® EDS441
ISOSCAN® EDS441

Insulation fault locator for localisation of insulation faults in control circuits

ISOSCAN® EDS460-D
ISOSCAN® EDS460-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS460-L
ISOSCAN® EDS460-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS461-D
ISOSCAN® EDS461-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS461-L
ISOSCAN® EDS461-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS490-D
ISOSCAN® EDS490-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS490-L
ISOSCAN® EDS490-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS460-DG
ISOSCAN® EDS460-DG

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS491-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS491-L
ISOSCAN® EDS491-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

ISOSCAN® EDS150
ISOSCAN® EDS150

Insulation fault locator with 6 integrated measuring current transformers for localisation of insulation faults in main circuits

ISOSCAN® EDS151
ISOSCAN® EDS151

Insulation fault locator with 6 integrated measuring current transformers for localisation of insulation faults in control circuits

ISOSCAN® EDS30…
ISOSCAN® EDS30…

Portable insulation fault location systems for unearthed and earthed systems (IT and TN systems)

Power Quality

LINETRAXX® PEM353

Universal measuring device with numerous measured quantities, energy and power measurement with storage, Power Quality Monitoring, limit value monitoring with alarm forwarding

System components

AGH204S-4
AGH204S-4

Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V

AGH520S
AGH520S

Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V

AGH675S-7/AGH675S-7MV15
AGH675S-7…

The coupling device AGH675S-7/AGH675S-7MV15 is designed to extend the nominal voltage range of the ISOMETER® IRDH275BM-7 to AC/DC 0…15.5 kV.

AGH676S-4
AGH676S-4

Extension of the nominal voltage range of ISOMETER® iso685.../IR420-D64 series to AC 0...12 kV

Residual current monitoring

LINETRAXX® SmartDetect RCMS410

Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems

LINETRAXX® RCMS460-D
LINETRAXX® RCMS460-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

LINETRAXX® RCMS460-L
LINETRAXX® RCMS460-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

LINETRAXX® RCMS490-D
LINETRAXX® RCMS490-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

LINETRAXX® RCMS490-L
LINETRAXX® RCMS490-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

Current transformers

LINETRAXX® CTUB100 series

AC/DC sensitive measuring current transformer (Type B)

Insulation monitoring

ISOMETER® iso685…
ISOMETER® iso685…

Insulation monitoring device for inverter applications and large industrial plants

Details
ISOMETER® IR425-D4
ISOMETER® IR425-D4

Insulation monitoring device for unearthed AC/DC control circuits

Details

Insulation fault location

ISOSCAN® EDS440
ISOSCAN® EDS440

Insulation fault locator for localisation of insulation faults in main circuits

Details
ISOSCAN® EDS441
ISOSCAN® EDS441

Insulation fault locator for localisation of insulation faults in control circuits

Details
ISOSCAN® EDS460-D
ISOSCAN® EDS460-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS460-L
ISOSCAN® EDS460-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS461-D
ISOSCAN® EDS461-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS461-L
ISOSCAN® EDS461-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS490-D
ISOSCAN® EDS490-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS490-L
ISOSCAN® EDS490-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS460-DG
ISOSCAN® EDS460-DG

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS491-D

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS491-L
ISOSCAN® EDS491-L

- This device series is in the discontinuation phase. -
Deliverable according to availability until 01.01.2025.

Details
ISOSCAN® EDS150
ISOSCAN® EDS150

Insulation fault locator with 6 integrated measuring current transformers for localisation of insulation faults in main circuits

Details
ISOSCAN® EDS151
ISOSCAN® EDS151

Insulation fault locator with 6 integrated measuring current transformers for localisation of insulation faults in control circuits

Details
ISOSCAN® EDS30…
ISOSCAN® EDS30…

Portable insulation fault location systems for unearthed and earthed systems (IT and TN systems)

Details

Power Quality

LINETRAXX® PEM353

Universal measuring device with numerous measured quantities, energy and power measurement with storage, Power Quality Monitoring, limit value monitoring with alarm forwarding

Details

System components

AGH204S-4
AGH204S-4

Extension of the nominal voltage range of ISOMETER® iso685 series to AC, 3(N)AC 0...1650/0...1300 V

Details
AGH520S
AGH520S

Extension of the nominal voltage range of ISOMETER® to AC 0...7200 V

Details
AGH675S-7/AGH675S-7MV15
AGH675S-7…

The coupling device AGH675S-7/AGH675S-7MV15 is designed to extend the nominal voltage range of the ISOMETER® IRDH275BM-7 to AC/DC 0…15.5 kV.

Details
AGH676S-4
AGH676S-4

Extension of the nominal voltage range of ISOMETER® iso685.../IR420-D64 series to AC 0...12 kV

Details

Residual current monitoring

LINETRAXX® SmartDetect RCMS410

Four-channel DC, AC and pulse current sensitive residual current monitor for earthed AC, AC/DC and DC systems

Details
LINETRAXX® RCMS460-D
LINETRAXX® RCMS460-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

Details
LINETRAXX® RCMS460-L
LINETRAXX® RCMS460-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor

Details
LINETRAXX® RCMS490-D
LINETRAXX® RCMS490-D

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

Details
LINETRAXX® RCMS490-L
LINETRAXX® RCMS490-L

Multichannel AC, pulsed DC and AC/DC sensitive residual current monitor with one alarm contact per channel

Details

Current transformers

LINETRAXX® CTUB100 series

AC/DC sensitive measuring current transformer (Type B)

Details

Standards

DIN EN 50178

Electronic equipment for use in power installations

IEC 60204-1

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

DIN EN 61557-8

Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems

EN 61557-9

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems

EN 61557-15

Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems

IEC 60092-502

Electrical installations in ships - Part 502: Tankers - Special Features

IEC 60092-201

Electrical installations in ships - Part 201: System design - General

IEC 60092-504

Electrical installations in ships - Part 504: Automation, control and Instrumentation

IEC 60092-202

Electrical installations in ships - Part 202: System design - Protection

qhy4raey

Do you have any questions?

Please contact us! We are here to help.

TO CONTACT FORM